• Generate Key Pair Windows
• Openssl Generate Key File
• Openssl Generate Key Pair Windows 9
• Openssl Generate Key Pair Windows 6
• Openssl Generate Key Pair Windows 7

May 29, 2016 The most effective and fastest way is to use command line tools: codeopenssl genrsa -out mykey.pem 4096 openssl rsa -in mykey.pem -pubout mykey.pub /codeIt’ll generate RSA key pair in code mykey.pem/code and code mykey.pub/code. Dec 01, 2015  How to create self-certified SSL certificate and public/private key files. Iguana supports OpenSSL SSH-2 private keys and certificates in PEM format, these must not be password protected. May 22, 2019 It is advised to issue a new private key each time you generate a CSR. Hence, the steps below instruct on how to generate both the private key and the CSR. Openssl req -new -newkey rsa:2048 -nodes -keyout yourdomain.key -out yourdomain.csr. Make sure to replace yourdomain with the actual domain you’re generating a CSR for.

Introduction

A Certificate Signing Request (CSR) is the first step in setting up an SSL Certificate on your website. SSL certificates are provided by Certificate Authorities (CA), which require a Certificate Signing Request (CSR).

Openssl rsa -in private.pem -outform PEM -pubout -out public.pem. The -pubout flag is really important. Be sure to include it. Next open the public.pem and ensure that it starts with -BEGIN PUBLIC KEY-. This is how you know that this file is the public key of the pair and not a private key. Mar 30, 2015  This will fire up OpenSSL, instruct it to generate a certificate signing request, and let it know to use a key we are going to specify – the one we just created, in fact. Note that a certificate signing request always has a file name ending in.csr. Create a key pair. To create a key pair, at a command prompt, type the following command: sn –k In this command, file name is the name of the output file containing the key pair. The following example creates a key pair called sgKey.snk. Sn -k sgKey.snk.

This guide will instruct you on how to generate a Certificate Signing Request using OpenSSL.

• Access to a user account with root or sudo privileges
• A command line/terminal window
• If you’re working on a remote server, an established SSH connection to the server
• OpenSSL needs to be installed on your system to generate the key
• A text editor, such as nano, to view your key

Open a terminal window. Use your SSH connection to log into your remote server.

Note: If you are working locally, you don’t need an SSH connection. Also, most Linux systems will launch a terminal window by pressing Ctrl-Alt-T or Ctrl-Alt-F1.

It is advised to issue a new private key each time you generate a CSR. Hence, the steps below instruct on how to generate both the private key and the CSR.

Make sure to replace your_domain with the actual domain you’re generating a CSR for.

The commands are broken out as follows:

• openssl – activates the OpenSSL software
• req – indicates that we want a CSR
• –new –newkey – generate a new key
• rsa:2048 – generate a 2048-bit RSA mathematical key
• –nodes – no DES, meaning do not encrypt the private key in a PKCS#12 file
• –keyout – indicates the domain you’re generating a key for
• –out – specifies the name of the file your CSR will be saved as

Note: Use 2048-bit key pairs. The 4096-bit key pairs are more secure, however, they require a lot more server resources.

Your system should launch a text-based questionnaire for you to fill out.

Enter your information in the fields as follows:

• Country Name – use a 2-letter country code (US for the United States)
• State – the state in which the domain owner is incorporated
• Locality – the city in which the domain owner is incorporated
• Organization name – the legal entity that owns the domain
• Organizational unit name – the name of the department or group in your organization that deals with certificates
• Common name – typically the fully qualified domain name (FQDN), i.e. what the users type in a web browser to navigate to your website
• Email address – the webmaster’s email address
• Challenge password – an optional password for your key pair

Please take into account that Organization Name and Unit Name must not contain the following characters:

< > ~ ! @ # $ % ^ * / ( ) ?.,&

Once the software finishes, you should be able to find the CSR file in your working directory.

You can also enter the following:

Generate Key Pair Windows

The system should list out all certificate signing requests on the system. The one that matches the domain name you provided in Step 2 appended with the .csr extension is the one you need to look into.

You can open the .csr file in a text editor to find the alphanumeric code that was generated.

Enter the following command:

This text can be copied and pasted into a submittal form to request your SSL certificate from a Certificate Authority.

Make sure you copy the entire text. Some CAs may allow you to simply upload the .csr file you generated. Below is an example of a CSR.

You needn’t send the private key to the CA. Once you get your SSL certificate, the private key on the server will bind with it to encrypt communication.

Now you know how to generate an OpenSSL certificate signing request. Before submitting the CSR to a certificate authority, we recommend verifying the information it holds. Use one of the widely available online CSR decoders.

SSL is a crucial protocol for securing traffic between a website and its visitors. It helps to protect sensitive information online, such as credit card data.

Next, You Should Also Read:

While Encrypting a File with a Password from the Command Line using OpenSSLis very useful in its own right, the real power of the OpenSSL library is itsability to support the use of public key cryptograph for encrypting orvalidating data in an unattended manner (where the password is not required toencrypt) is done with public keys.

The Commands to Run

Generate a 2048 bit RSA Key

You can generate a public and private RSA key pair like this:

openssl genrsa -des3 -out private.pem 2048

That generates a 2048-bit RSA key pair, encrypts them with a password you provideand writes them to a file. You need to next extract the public key file. You willuse this, for instance, on your web server to encrypt content so that it canonly be read with the private key.

Export the RSA Public Key to a File

This is a command that is

openssl rsa -in private.pem -outform PEM -pubout -out public.pem

The -pubout flag is really important. Be sure to include it.

Next open the public.pem and ensure that it starts with-----BEGIN PUBLIC KEY-----. This is how you know that this file is thepublic key of the pair and not a private key.

To check the file from the command line you can use the less command, like this:

less public.pem

Do Not Run This, it Exports the Private Key

A previous version of the post gave this example in error.

openssl rsa -in private.pem -out private_unencrypted.pem -outform PEM

The error is that the -pubout was dropped from the end of the command.That changes the meaning of the command from that of exporting the public keyto exporting the private key outside of its encrypted wrapper. Inspecting theoutput file, in this case private_unencrypted.pem clearly shows that the keyis a RSA private key as it starts with -----BEGIN RSA PRIVATE KEY-----.

Visually Inspect Your Key Files

Openssl Generate Key File

It is important to visually inspect you private and public key files to makesure that they are what you expect. OpenSSL will clearly explain the nature ofthe key block with a -----BEGIN RSA PRIVATE KEY----- or -----BEGIN PUBLIC KEY-----.

You can use less to inspect each of your two files in turn:

• less private.pem to verify that it starts with a -----BEGIN RSA PRIVATE KEY-----
• less public.pem to verify that it starts with a -----BEGIN PUBLIC KEY-----

The next section shows a full example of what each key file should look like.

The Generated Key Files

The generated files are base64-encoded encryption keys in plain text format.If you select a password for your private key, its file will be encrypted withyour password. Be sure to remember this password or the key pair becomes useless.

Openssl Generate Key Pair Windows 9

The private.pem file looks something like this:

The public key, public.pem, file looks like:

Protecting Your Keys

Openssl Generate Key Pair Windows 6

Depending on the nature of the information you will protect, it’s important tokeep the private key backed up and secret. The public key can be distributedanywhere or embedded in your web application scripts, such as in your PHP,Ruby, or other scripts. Again, backup your keys!

Openssl Generate Key Pair Windows 7

Remember, if the key goes away the data encrypted to it is gone. Keeping aprinted copy of the key material in a sealed envelope in a bank safety depositbox is a good way to protect important keys against loss due to fire or harddrive failure.

Oh, and one last thing.

If you, dear reader, were planning any funny business with the private key that I have just published here. Know that they were made especially for this series of blog posts. I do not use them for anything else.

Found an issue?

Rietta plans, develops, and maintains applications.

Learn more about our services or drop us your email and we'll e-mail you back.

Other Blog Articles Published by Rietta.com